Commit fa8e82c6 authored by Alan Mitchell's avatar Alan Mitchell

Changed some default change parameters for power monitor.

parent 4192de73
...@@ -158,9 +158,9 @@ PWR_INCL_PF = True # Detailed Power Factor ...@@ -158,9 +158,9 @@ PWR_INCL_PF = True # Detailed Power Factor
# Change Thresholds for each of the measrement types. These determine # Change Thresholds for each of the measrement types. These determine
# whether a new point is registered. # whether a new point is registered.
PWR_THRESHOLD_PWR = 5.0 # Watts, resolution is 0.1 W / PWR_CT_WRAPS PWR_THRESHOLD_PWR = 3.0 # Watts, resolution is 0.1 W / PWR_CT_WRAPS
PWR_THRESHOLD_VOLT = 0.3 # Volts, resolution of sensor is 0.1 Volt PWR_THRESHOLD_VOLT = 0.3 # Volts, resolution of sensor is 0.1 Volt
PWR_THRESHOLD_AMP = 0.05 # Amps, resolution is 0.001 A / PWR_CT_WRAPS PWR_THRESHOLD_AMP = 0.03 # Amps, resolution is 0.001 A / PWR_CT_WRAPS
PWR_THRESHOLD_FREQ = 0.1 # Hz, resolution of sensor is 0.1 Hz PWR_THRESHOLD_FREQ = 0.1 # Hz, resolution of sensor is 0.1 Hz
PWR_THRESHOLD_PF = 0.02 # Power factor, resolution is 0.01 PWR_THRESHOLD_PF = 0.02 # Power factor, resolution is 0.01
...@@ -170,7 +170,7 @@ PWR_THRESHOLD_PF = 0.02 # Power factor, resolution is 0.01 ...@@ -170,7 +170,7 @@ PWR_THRESHOLD_PF = 0.02 # Power factor, resolution is 0.01
# a reading will be posted at least every 60 seconds. # a reading will be posted at least every 60 seconds.
# Set this to None to allow any interval between change values, remembering # Set this to None to allow any interval between change values, remembering
# that the first reading of a logging interval will always be posted. # that the first reading of a logging interval will always be posted.
PWR_MAX_INTERVAL = 60 # seconds, approximately PWR_MAX_INTERVAL = 180 # seconds, approximately
# --------------- Multi-Channel Pulse Counter script ------------ # --------------- Multi-Channel Pulse Counter script ------------
# See pi-energy-sensors GitHub project for the scripts configured here. # See pi-energy-sensors GitHub project for the scripts configured here.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment